Three-way tipper – the all-rounder for your fleet!
Total weight: 5 t – 19 t
Blomenröhr’s three-way tippers are true all-rounders in action: construction machinery can be loaded onto and secured on the low-profile tipper quickly and safely thanks to extendable aluminium loading rails. Once the machinery is in use on site, the tipper can collect the excavated material and transport it to the tip. It makes no difference whether the load consists of good topsoil, fine-grained sand, coarse gravel, tarmac or large boulders: the side panels close tightly and the extremely robust, wear-resistant steel floor – with a hardness rating of 450HB, fitted as standard on models with a gross weight of 8to or more – can withstand any load!
At the landfill or its destination, the excavated material can be unloaded sideways or backwards using a powerful 4-stage tipping cylinder – the tipping angle is normally 45°. As the lighting is protected in the collision guard, the side walls are stable and laser-welded and the tipper locks are robust, nothing is damaged during this process!
If the tipper is travelling more off-road than on the road, large balloon tyres can be used for low ground pressure. This further increases the already high ground clearance. If leaves or chopped material are also to be transported in autumn or spring, additional side walls made of steel, aluminium or perforated plates are recommended – so you can use your trailer optimally all year round!
We have been using the state-of-the-art EBS braking system with the TEM parking brake with Safe Parking on larger three-way tippers for years. From July 2024, the EBS braking system will be introduced on all air-braked trailers, as a tyre pressure monitoring system (TPMS) must be installed due to new EU directives. (UPDATE AUGUST 2024: Retroactive cancellation of the obligation to equip with TPMS with individual TÜV approval. Vehicles can now still be registered until 6 July 2026 without TPMS).
We will provide you with expert advice on which three-way tipper is suitable for your specific application and with which equipment. We have a wide range of load securing devices and toolboxes in our programme. The tippers are painted individually according to your wishes with high-quality truck paints from BASF/Glasurit – a hot-dip galvanised chassis is also possible. The individual equipment and colour scheme makes you stand out as a company on the road and gives your company a face! Thanks to the high-quality and varied equipment, the tippers and low-loaders are practical in daily use and also inexpensive to maintain.